AMT505 Color Spectrophotometer


Product Description

AMT505 Spectrophotometer
 
Brief Introduction:
1. Portable spectrophotometer adopts internationally agreed geometry D/8 (Diffused illumination, 8 degrees observe angle) and SCI (specular component included) / SCE (specular component excluded). It could be used for color matching for many industries and widely used in painting industry, textile industry, plastic industry, food industry, building material industry and other industries for color quality control.
2.Camera to view the measurement area. In previous measurement instrument, we can only aim at the testing area approximately which may introduce errors. Our spectrophotometers include a camera in our optical system, and the user can clearly see the measurement area to avoid measurement errors.
3. CLEDs light source: spectrally balanced LED light source. LED light source that has balanced intensity across visible spectrum avoids the spectral deficiency in certain parts of the spectrum in common white LEDs, and guarantees the speed of the measurement and the accuracy of the results. This research finding has been published in national leading, SCI included optical journal, Chinese Optics Letter.
4. Every Test Calibration Technology (ETC). For now most instruments use standard white tile for calibration. When white tile is damaged, the instrument's accuracy or precision will no longer be guaranteed. We adopt innovative technology ETC (Every Test Calibration); standard white board is included in the optical system, and therefore has reliable accuracy and repeat-ability in every measurement.
5. Color QC Software: Our spectrophotometer comes with PC color QC software, which is applicable in various industries for management of color data. It is used for store test result,generate test report and print test report after connect with printer.
6. Automatic Gloss Compensation Technology. Gloss will greatly affect the measurement of color. Our instrument adopts automatic gloss compensation technology which guarantees the accuracy of color measurement value for surfaces of different gloss. This research finding is published in international leading, SCI included journal, Optik.
7. Innovative light splitting SCS optical engine. Adopt innovative single-grating-dual-light-paths light splitting system: SCS optical engine which creates the best measurement repeatability for portable spectrophotometers and guarantees accurate measurement of surface color of materials.
8. The most complete light sources compares with similar products. Comparing with similar products, our spectrophotometers offer the most complete, 28 kinds of standard light sources and 40 measurement color value indicators; It can also customize measurement methods according to your requirement, and satisfy all your color measurement needs.
 
Specifications:
1. Illumination: d/8 (Diffused lighting, 8 degrees observe angle), SCI (specular reflection included) / SCE (specular reflection excluded) simultaneous measurement. (conform to CIE No.15, ISO 7724/1, ASTM E1164, DIN 5033 Teil7, JIS Z8722 Condition C standards)
2. Size of integrating sphere: Φ40mm, diffused reflection surface coating
3. Illumination Light source: CLEDs (entire wavelength balanced LED light source)
4. Sensor: dual light path sensor array
5. Wavelength Range: 400~700nm
6. Wavelength Interval: 10nm
7. Half spectral width: 5nm
8. Reflectivity range: 0~200%
9. Reflectivity resolution: 0.01%
10. Observation angle: 2°/10°
11. Measurement light source: A, C, D50, D55, D65, 75, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DLF, TL83, TL84, NBF, U30, CWF
12. Data being displayed: SPD distribution/data,sample's color values,color difference values/graph, pass/fail results, color error tendency, color simulation,display measurement area,history data color simulation,manual input standard sample,generate measurement report
13. Measurement time interval: 2 seconds
14. Measurement time: 1 second
15. Color space: CIE-L*a*b, L*C*h, L*u*v, XYZ, Yxy, Reflectance
16. Color difference formulas: ΔE*ab, ΔE*CH, ΔE*uv, ΔE*cmc(2:1), ΔE*cmc(1:1), ΔE*94, ΔE*00
17. Other colorimetric indices: WI (ASTM E313-10, ASTM E313-73, CIE/ISO, AATCC, Hunter, Taube Berger, Ganz, Stensby); YI(ASTM D1925, ASTM E313-00, ASTM E313-73); Tint (ASTM E313, CIE, Ganz). Metamerism index Milm, Stick color fastness, Color fastness.
18. Repeatability:
     1) light splitting reflectivity: standard deviation within 0.08%
     2) color values:ΔE*ab<=0.03(After calibration, standard deviation of 30 measurements on test white board, 5 second intervals), Maximum:0.05
19. Test Aperture: 10mm
20. Battery capacity: Rechargeable, 10000 continuous tests, 7.4V/6000mAh
21. Interface: USB
22. Data storage: 20000 test results
23. Light source longevity: 5 years, 1.5 million tests
24. Inter-instrument agreement: ΔE*ab within 0.2 (BCRA color charts II, average of the 12 charts)
25. Size: 181*73*112mm (L*W*H)
26. Weight: about 550g (does not include battery's weight)
27. Display: True color screen that includes all colors
28. Work temperature range: 0~45℃, relative humidity 80% or below( at 35°C ), no condensation
29. Storage temperature range: -25℃ to 55℃, relative humidity 80% or below(at 35°C ),no condensation
30. Standard accessories: DC adapter, Lithium battery, manual, color management software, drive software, electronic manual, color management guide, USB cable, black/white calibration tube, protective cover, spire lamella, portable bag, electronic color charts
31. Optional accessories: powder molding device, micro printer, measurement and test report
32. Color matching system: not match
33. UV light source: without UV light source